My WordPress

Screenshot 2025-05-27 134822

A reference always ready to help you!

(+39) 0541 794 444

How to Avoid Pitting Corrosion?

The pitting is likely the best known corrosion phenomena in relation to stainless steels. But what causes this phenomenon? And how can you avoid it? Pitting. What are its causes? Pitting is caused by local laceration of the passive layer. But how it originated? This phenomenon arises from the action of strongly activating elements such […]

How to Avoid Pitting Corrosion?

How to Avoid Pitting Corrosion? The pitting is likely the best known corrosion phenomena in relation to stainless steels. But what causes this phenomenon?  Pitting. How to cause it? Pitting is caused by local laceration of the passive layer. But how it originated? This phenomenon arises from the action of strongly activating elements such as […]

Stainless Steel and Water and Wastewater Treatments

Can the composition of the water affect the corrosive effect in relation to stainless steel? We want to explain it in our post today. Demineralized water. Is it corrosive for steel? The composition of the water may impact significantly on the corrosive effect compared to stainless steel. Let’s look specifically: What are the effects under […]

Boat Bottom. What Is the Best Material? – PART 1

What causes the corrosion of the bottom of the boat? Galvanic currents and the organisms present in the water can cause this phenomenon. How do you protect your boat? Annual maintenace. What should you replace? Before launching a boat for the season, it requires a careful maintenance. But what are the works to be carried […]

The Cold Climate and First Snowfall. Stainless Steel for Salt Trucks.

Winter has come and brings with him the first snowfalls and thus potential danger from ice formation on the roads. The intervention of salt trucks can become necessary, but how are they manufactured? Stainless steel AISI 316 allows to work with any type of material from sand, to salt and grit. The construction of salt […]

Standard EN 1090-2 – Steel Structural Products. PART 2

The second part of our post on EN 1090-2 concerning the execution of steel structures and aluminium. Today we will see more specifically the products identified by the standard. What type of steel structural products? It is necessary that these products conform to the following European norms:             1.1 EN10025 […]

Standard EN 1090-2 – Section 5: The Component Items – PART 1

Today back to the matter in hand of standard EN 1090-2 concerning the Execution of steel structures and aluminium. In particular, we focus on Section 5 which deals with products that add defining the characteristics of metal products used in steel structures. What do the standards say? The type of control document to be provided […]