The Workability of Stainless Steel

Posted on
The Workability of Stainless Steel

The workability of stainless steel. Stainless steels be subjected to normal manufacturing processes. Some examples? The roll forming, bending etc.. Let us see them more specifically.


 

Working processes.

As mentioned earlier today we talk about the workability of stainless steels. What are working processes?

  • roll forming
  • bending
  • cutting with guillotine shear
  • drilling
  • stamping
  • welding

 

 

 

 

What are the differences between?

Austenitic steels are subject to work hardening. This means that to enter into a transaction as the folding you need the 50% extra strength than carbon steels of equal thickness. In addition, austenitic steels are subject to the phenomenon of “spring back”. Also, these type of steels must be over folded about 5° to compensate.

 

Here some farsightedness.

It is necessary to pay special attention to tools used with stainless steel. It is important that the utensils used for working stainless steel are “dedicated” solely for this use. So you will avoid the risk of contamination from the surface of the particles of carbon steel.

Also, for the drilling process it is recommended to use:

  • sharp drill bit
  • appropriate feed rate

This will prevent the stains or hardening of the material.

 


Find our webshop.
Click on the link below to access on our web shop. You can choose the most suitable items to your customers needs.

Click here

 

Leave a Reply

Your email address will not be published. Required fields are marked *

Informativa Privacy Ai sensi dell’art.13 del regolamento (UE) 2016/679 i dati personali raccolti nella presente forme saranno trattati solo per rispondere alle richieste inviate. Per maggiori informazioni consultare l’informativa Privacy completa.

WordPress Theme by RichWP