Wire Cold-Processing Technologies
There are 3 types of cold-processing of wire. Here they are specifically treated. What are the technologies? METHOD OF DIRECT EXTRUSION (see figure 3.0 – 8) This method reduces the diameter where the percentage reduction shall be free or it is limited by the material’s ability to enter into a smaller diameter mold. METHOD OF […]
Dynamic Loads. The Resistance of Stainless Steel Screws.
Screws are notched components. Why are they considered as such? For their threading. And where the screws are subjected to repeated and irregular stress? In some cases the break occurs in the first load-bearing part of the thread, at the entry into the internal (female) thread. (in 90%) What is it necessary for the design? […]
Holes for Screws. What Is the Difference Between Counterbore and Countersunk?
Screw holes? How to create and what tools do you use? Today we will discuss this topic: counterbore and countersunk. Counterbore and countersunk. What are the differences? The “counterboring” is a mechanical process which consists in a cylindrical hole with a flat bottom which wides in turn another coaxial hole. This mechanical process is made by a […]
Stainless Steel Fasteners With More Than 13.000 Online Items.
Stainless steel fasteners means: screws, bolts, washers and nuts. So all those key components for theassembly. These items differ in their type, size, forms but also for their quality standards. These components must be made on national and EU laws and directives that certifying their quality and security conformity.
AISI 316. Great Resistance to Hydrogen Sulfide Acid Corrosion
If you are looking for screws, bolts or hardware suitable with hydrogen sulfide acid, do not make the mistake of choosing a material that is not AISI 316. AISI 316 and resistance to hydrogen sulfide acid. In which sectors is it most commonly used? The hydrogen sulfide acid is most commonly used on the following […]